• Parchi industriali del villaggio di Qinganbao, città di Bay, provincia di Shaanxi
Facebook X-twitter Linkedin Pinterest Instagram

Il nostro Prodotti

Menu Chiudere
Chiudere

In linea Messaggio

Contatto Dettagli

Matters needing Attention when Using Coated Titanium Anode

  1. Metal oxide coatedtitanium anodes (MMO coated titanium anodes) should be installed under suitable electrolytic conditions.
  2. Avoid grease contamination of theanodo di titanio coating.
  3. The surface of the coatedtitanium electrode is very easy to be scratched. It cannot be rubbed or knocked with hard objects, polished with wire brushes or sandpaper, or cleaned with high-pressure water spray.
  4. When theanodo di titanio is removed from the electrolytic cell, it should be rinsed with water immediately to prevent corrosion.
  5. Titanium anodesthat need to be stored for a long time should be carefully packed with inflatable plastic packaging materials to avoid scratches on the coating surface or dust.
  6. A distance of 5-20cm should always be maintained between electrodes. An accidental short circuit between the cathode and anode of theanodo di titanio can cause irreversible damage to the anodo di titanio coating and can also damage the titanium substrate. In the event of a severe short circuit, the anodo di titanio can be completely destroyed.
  7. Theanodo di titanio must be in working condition as long as it is immersed in or in direct contact with the electrolyte. If the anodo di titanio is not energized, a low positive voltage (residual voltage) can be applied to the anodo di titanio. This requires only 2V to be applied between the anode and cathode, without using a power supply and a big current.
  8. Impurities such as lead, iron and barium in the electrolyte should be tracked. This will not generate a large amount of anode deposits. Anode deposits can clog theanodo di titanio surface and cause uneven distribution of anode current.
  9. Organic additives are added to the electrolyte, and different additives will have different effects on the life of thetitanium anode.
  10. Removal ofAnodo di titanio Surface Deposits.

GEERWORK può produrre anodi di titanio di diverse forme, tra cui fogli, reti, fili, barre, piastre, tubi o altre combinazioni. La forma è determinata dai seguenti fattori.

Facebook X-twitter Linkedin Pinterest Instagram

Veloce Collegamenti

Contatto Noi

Tutti i diritti riservati @ Shaanxi Geerwork Metal Material Co. Ltd.

Torna in alto