1. When cleaning the titanium anode, be sure to handle it gently. When cleaning, use a brush to gently sweep away the dirt on the surface, and avoid scratching with sharp objects.

2. In the process of daily use, due to the high content of calcium ions and iron elements in the water in some areas, impurities such as calcium carbonate and iron hydroxide will appear during the electrolysis process. These impurities in the water may cause a short circuit between the anode and cathode of the electrode，Even break down the electrode.

Therefore, users should clean the equipment regularly according to their local water quality, keep the equipment clean, and avoid the accumulation of impurities.

3. During the electrolysis reaction process of the equipment, the effective content should be kept within 1%. This is because if the chlorine content is too high, it will not only affect the reaction result of the treatment, but also affect the service life of the electrode.

4. During the operation of the equipment, always observe whether the electrolysis current and voltage of the equipment are within the specified range. Detect the circulation of pickled acid liquid and cooling water in time to prevent blockage from happening.

5. The equipment should be shut down for inspection after 20 hours of operation. The brine valve of the equipment is closed, the chlorine in the electrolyzer is drained, and the flushing valve is opened for flushing. After flushing, the flushing valve is closed and drained, and the brine valve is opened. , Make preparations for the start-up of the equipment.